The coaxial cable stripping machine cannot strip the second layer of wire

　　If your coaxial cable stripping machine is not successfully stripping the second layer of insulation, you might consider the following troubleshooting steps:

　　1. Check Blade Adjustment:

　　Ensure that the blade depth is set correctly for stripping multiple layers. The blade must be adjusted to cut through the outer insulation without damaging the inner layers.

　　2. Inspect Blade Condition:

　　The blade might be dull or damaged. Check the blade for wear and replace it if necessary. Ensure it’s sharp and properly aligned.

　　3. Verify Cable Specifications:

　　Confirm that the machine settings match the specifications of the coaxial cable you are using. Different cables have varying thicknesses and insulation types.

　　4. Clean the Machine:

　　Remove any debris or buildup that might affect the blade’s performance. Sometimes, residue from the insulation can obstruct proper stripping.

　　5. Check for Proper Calibration:

　　Some machines require calibration for different types or sizes of cables. Verify that your machine is correctly calibrated for the cable you are working with.

　　6. Inspect Machine Components:

　　Ensure that all components related to the stripping process, such as rollers or guides, are in good condition and functioning correctly.

　　7. Adjust the Stripping Program:

　　If your machine has programmable settings, make sure that the stripping program is correctly set up for the cable’s insulation layers.

　　8. Perform a Test Strip:

　　Run a test with different cables or adjust the machine settings to see if the problem persists. This can help identify if the issue is with the cable type or the machine itself.

　　9. Consult the Manual:

　　Refer to the machine’s user manual for specific troubleshooting tips related to the model you are using. There might be particular instructions or settings for dealing with issues like this.

　　10. Contact Support:

　　If you’ve tried all the above steps and the problem remains unresolved, consider reaching out to the manufacturer’s technical support for further assistance. They may provide additional troubleshooting steps or recommend professional service.

　　Proper maintenance and correct setup are crucial for efficient wire stripping, so addressing these areas should help resolve the issue.