Coaxial Wire Stripping Machine Operating Instructions

　　The operating instructions for a coaxial wire stripping machine typically include the following steps:

　　1. Preparation

　　Check the Equipment: Ensure the machine is in proper working condition, the power supply is stable, and all components are intact.

　　Set Parameters: Based on the cable specifications and requirements, set appropriate stripping length, layers, and cutting depth on the machine's control panel.

　　2. Install the Cable

　　Secure the Cable: Insert one end of the cable into the feed port and secure it with the clamp to prevent it from slipping.

　　Positioning: Adjust the cable so that it is correctly aligned with the stripping blade.

　　3. Start the Machine

　　Activate the Machine: Press the start button to begin the stripping process.

　　Monitor the Process: Observe the machine as it operates to ensure smooth functioning and check for any issues like jamming or wire breakage.

　　4. Stripping Process

　　Cutting and Stripping: The machine will automatically cut and strip the outer and inner insulation layers of the cable according to the set parameters.

　　Completion: Once the stripping process is complete, the machine will stop, and the stripped cable can be removed from the outlet.

　　5. Inspection and Adjustment

　　Inspect the Quality: After stripping, check the quality to ensure the wire core is not damaged and no excess insulation remains.

　　Make Adjustments: If the stripping is not satisfactory, adjust the parameters as needed and repeat the process.

　　6. Routine Maintenance

　　Clean the Machine: Regularly clean the blades and the machine's interior to prevent debris accumulation, which could affect performance.

　　Regular Inspection: Periodically inspect all parts of the machine, especially the blades for wear, and replace them as necessary.