Working principle of coaxial wire stripping machine

　　Working Principle of Coaxial Cable Stripping Machine

　　1. Feeding

　　Feeding Device: The coaxial cable is fed into the stripping machine. It usually includes an automatic feeding system to ensure smooth and consistent feeding of the cable.

　　2. Positioning

　　Fixing Device: The cable is held in place inside the stripping machine to prevent movement during the stripping process.

　　3. Stripping

　　Stripping Blades: The machine is equipped with stripping blades (typically rotary blades or cutting wheels) that remove the outer jacket, insulation layer, and shielding layer of the cable in layers. The machine precisely cuts to the specified stripping length.

　　4. Adjustment

　　Set Length and Depth: Users can set the stripping length and depth according to their needs to accommodate different cable specifications and application requirements.

　　5. Discharge

　　Stripped Cable: After stripping, the cable is discharged through an exit device, and the stripped cable can proceed to further processing or use.

　　6. Control System

　　Operating Interface: The machine typically features an operating interface for adjusting stripping parameters, monitoring operation status, and performing fault diagnostics.